BBVCD - L TX HOUSE PAINT MIDTONE BASE ACRYLIC 6-65
- MSDS: BBVCD
- Manufacturer: PPG INDUSTRIES INC
- Product Name: L TX HOUSE PAINT MIDTONE BASE ACRYLIC 6-65
- National Stock Number: 8010-00F006178
Product Identification
Product ID:L TX HOUSE PAINT MIDTONE BASE ACRYLIC 6-65
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006178
MSDS Number: BBVCD
Responsible Party
Emergency Phone: (304) 843-1300
Cage: DO894
Contractor
Telephone: 412-592-5555
Cage: DO894
Ingredients
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 1%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
SILICA, AMORPHOUS, DUST
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 15%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3; 8990
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10 - 15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 45 - 50%
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:INGESTION: HARMFUL OR FATAL IF SWALLOWED.
EYE/SKIN/NOSE/THROAT IRRITATION. KIDNEY & LIVER DAMAGE.
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING. EYE: FLUSH W/WATER FOR AT
LEAST 15 MINUTES. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER W/SOAP & WATER. INHALATION: REMOVE TO FRESH
AIR. APPLY ARTIFICIAL RESPIRATION. CONTACT PHYSICIAN.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER SPRAY CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP/EXPLOSION/BURSTING/AUTOIGNITION/WEAR SCBA
Accidental Release
Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESPIRATORY/SKIN/EYE PROTECTI SHOULD BE PERMITTED IN THE
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE USPILLED MATERIAL
W/SAWDUST/VERMICULITE/ABSOR BENT MATERIAL/PLACE INTO CONINERS.
Handling
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE QTYS IN
BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASIIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Exposure Controls
Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
RESPIRATOR.
Protective Gloves:NITRILE/NEOPREN
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, IMPERMEABLE APRON,
LATEX RUBBER.
Supplemental Safety and Health
MSDS DATED: 9/25/86. % SOLID BY WT: 51.4. ALSO CONTAINS: SILICA,
AMORPHOUS-FUSED (VV7320000) 5%, FILM FORMERS, RESINS, & AITIVES
20%.
Chemical Properties
Boiling Pt:B.P. Text:100-244C
Vapor Pres:17.
Vapor Density:>AIR
Evaporation Rate & Reference:(BUOAC=100): 33
Solubility in Water:48.4
Percent Volatiles by Volume:62.6
Stability
Stability Indicator/Materials to Avoid:YES
CONT W/STRONG ALKALIES/MINERAL ACIDS/STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.